The top 10 carbon capture technologies in 2026

As carbon capture technologies gain attention for their potential to cut emissions, the challenge is to identify which ones can hold up to their promise.

This report examines 455 technologies and shortlists the top 10, each backed by verified project milestones. It also compares their capture rates, energy use, suppliers, and industrial applications to guide investment decisions.

Industrial teams planning emissions cuts must decide which carbon capture technologies warrant pilot funding or capital investment. Supplier claims are difficult to assess without project evidence from comparable gas streams and operating conditions.

To assess supplier claims against project evidence, we screened 455 technologies from our CCUS Database and shortlisted 10 of the most promising, each backed by a verified project milestone. We explain how we ranked them and compare their operating requirements, reported performance, and progress from pilot testing to commercial deployment.

The report

The top 10 carbon capture technologies in 2026

Download this report to review the leading carbon capture technologies of 2026 and understand which solutions are delivering real impact toward sustainability goals.

The definition

What is carbon capture and storage?

Carbon capture and storage (CCS) separates carbon dioxide (CO₂) from industrial and power plant gas streams before it reaches the atmosphere. A project's feasibility depends on the quality of the captured stream and access to suitable geological storage. The points below trace CO₂ from capture to storage and put deployment in context.

Capture and purification

Operators separate CO₂ from the gas stream and remove impurities such as water vapor and sulfur oxides. These impurities can alter how CO₂ behaves during transport and corrode pipelines and wells.

Compression and transport

Operators compress CO₂ to a dense, liquid-like state and typically transport it by pipeline. Trucks, trains, and ships can also carry CO₂, generally at a higher cost per metric ton. Pipeline transport brings its own material and supplier choices, from liners to operators.

Geological storage

Operators inject CO₂ more than 2,500 feet underground into saline formations or depleted oil and gas reservoirs. Suitable sites have porous rock below an impermeable cap rock and are located away from faults.

CO₂ utilization

Enhanced oil recovery is the main use for captured CO₂. Smaller volumes go into building materials such as cement and concrete, as well as fuels, chemicals, and plastics.

Deployment scale

More than 50 million metric tons of CO₂ are stored each year, according to a 2024 estimate. Climate pathways put annual CO₂ capture at about 1 billion metric tons by 2030.

The capture routes

How do carbon capture technologies work?

Carbon capture technologies differ in where they separate CO₂ and how concentrated it is at that point. These differences affect how much energy separation requires and what changes an existing plant may need. The routes below show what teams should check when matching a capture system to a CO₂ source.

Post-combustion capture

Post-combustion systems separate CO₂ from exhaust after fuel burns in air. Nitrogen makes up about 78% of air by volume and dilutes the CO₂ in the exhaust. In conventional cement kilns, limestone calcination accounts for about 60% of emissions, and that CO₂ mixes with combustion exhaust.

Amine scrubbing is the most widely used separation method. Other methods across capture routes include membranes, solid sorbents, chemical and calcium looping, and cryogenic separation. A December 2015 analysis found that steam diverted to regenerate solvent typically accounts for about two-thirds of the total energy penalty when coal plants add capture.

Oxy-fuel combustion

Oxy-fuel systems burn fuel in pure oxygen, producing exhaust made up primarily of CO₂ and water vapor. Condensing the water leaves a stream of nearly pure CO₂.

This route typically requires plant modifications or a new build. Teams evaluating oxy-fuel combustion for a power plant or cement kiln should account for the energy and cost of producing oxygen.

Pre-combustion capture

Pre-combustion systems gasify or reform fuel to produce syngas, a mixture containing hydrogen, CO₂, and other gases. They then separate CO₂ from a concentrated stream under high pressure. Hydrogen and ammonia production are established applications.

In steam methane reforming, the process gas accounts for about 60% of emissions and furnace exhaust for about 40%. Separating CO₂ from the process gas is pre-combustion capture, while treating the furnace exhaust is post-combustion capture.

Inherent process capture

Inherent process capture separates CO₂ as part of the industrial process. Examples include fermentation in ethanol and biogas production, natural gas processing, and kilns designed to isolate CO₂ from limestone calcination.

Inherent process capture is the most common route in operation, according to a March 2025 overview. Teams should check which streams the existing process already separates when assessing the need for additional capture equipment.

Direct air capture and other removal routes

Direct air capture (DAC) uses fans to move ambient air through a chemical capture system. The CO₂ concentration in ambient air is about one three-hundredth of that in smokestack exhaust. This low concentration raises the energy needed for separation and adds cost.

Bioenergy with carbon capture and storage (BECCS) captures CO₂ released when biomass burns and sends it to storage. Teams evaluating BECCS should assess the biomass exhaust stream and confirm that captured CO₂ can reach a storage site.

The method

How the 2026 picks were chosen

We used our CCUS Database to narrow 455 technologies to a shortlist of 10 for the 2026 ranking. We verified milestones against company and trade press reports and ranked technologies within four categories. The criteria below explain which technologies qualified and how we calculated their scores.

01

Eligibility

Each technology needed a verified milestone between November 2025 and October 2026, plus an active or completed project beyond the lab. A technology from an earlier ranking could return only if it reached a major milestone in 2026.

02

Data compared

We compared capture processes, materials, emission sources, and how well each system could handle different flue gas conditions. The assessment also covered capture efficiency, energy use, industry applications, and the number of projects in the database.

03

Exclusions

We screened out systems requiring more than 2,000 kWh per metric ton of CO₂ unless they offered exceptional benefits. We also excluded systems unsuitable for industrial-scale emissions, gas treatment units without a capture-specific advance, and candidates that lacked both a qualifying milestone and an active project.

04

Scoring measures

Of the 100 available points, the verified milestone carried 20, while 2026 news activity and deployment record carried 15 each. Performance and novelty also carried 15 points each, with 10 each for scale in million t/yr and maturity based on TRL and the commercial readiness index (CRI).

05

Milestone weights

Plant start-up received a weight of 1.0, a final investment decision or construction received 0.8, and a contract or selection received 0.6. A pilot or verified results carried a weight of 0.5, while funding, a memorandum of understanding, or a study carried 0.3.

The ranking

The top 10 carbon capture technologies in 2026

Our 2026 ranking covers 10 technologies across point-source capture, carbon removal, capture-to-mineral systems, and onboard capture. Each profile pairs performance figures with deployment milestones and explains what industrial teams should verify before committing to a pilot.

1. Air Liquide Cryocap

CategoryPoint source
CountryFrance
ReadinessTRL 9
Score77.9/100
Capture90% to 95% capture, up to 98% for Cryocap Oxy and H₂
Energy336 kWh/tCO₂ of electricity
CostAbout $40/tCO₂ (company figure)

Cryocap uses pressure swing adsorption to concentrate CO₂ before cooling it for condensation and purification. The solvent-free process runs on electricity and delivers CO₂ above 99% purity as a high-pressure stream or liquid.

In February 2026, Air Liquide and Holcim agreed to deploy Cryocap Oxy for the 1.1 million t/yr GO4ZERO project at Obourg, Belgium, with a final investment decision pending. In June 2026, a Cryocap FG pilot started at Holcim's CaptureLab in France. That same month, Aalborg Portland's ACCSION project secured a Danish CCS Fund contract for up to 1.25 million t/yr.

Cryocap is an option for cement and lime, hydrogen, steel, chemical, and oil and gas facilities with sufficiently concentrated gas streams. Before a pilot, teams should verify that inlet CO₂ exceeds 15% on a dry basis and that the site can supply the required electricity.

2. thyssenkrupp Polysius Pure Oxyfuel

CategoryPoint source
CountryGermany
ReadinessTRL 7
Score65.2/100
CaptureUp to about 95% capture, including process CO₂
EnergyEnergy not stated
CostCost not stated

Pure Oxyfuel fires a cement kiln with pure oxygen to produce CO₂-rich exhaust for downstream purification. Oxygen travels from the clinker cooler to the main burner, controlling kiln temperature without flue gas recirculation.

On July 9, 2026, the catch4climate plant opened in Mergelstetten, Germany, as the first industrial-scale demonstration of pure oxyfuel in a cement kiln. The CI4C joint venture runs the test program on a line rated at 450 t of clinker per day.

The technology fits cement and lime teams evaluating changes to kiln combustion. Teams planning a pilot should estimate oxygen demand and supply cost and identify the modifications needed at the clinker cooler and burner.

3. Shell and Technip Energies Cansolv

CategoryPoint source
CountryUK
ReadinessTRL 9
Score61.1/100
Capture90% capture, with up to 99% claimed by the suppliers
EnergyAbout 729 kWh/tCO₂ of heat
Cost$58 to $110/tCO₂ at Boundary Dam

Cansolv uses Shell's regenerable DC-103 amine solvent to remove CO₂ from gas streams. The solvent has low volatility, degrades slowly, and needs less regeneration energy than first-generation amines. Technip Energies supplies the system as Canopy by T.EN.

In 2026, the UK's Net Zero Teesside Power project was under construction, with about 740 MW of generating capacity and 2 million t/yr of planned CO₂ capture. Contracting across the East Coast Cluster gained pace in April 2026. The project builds on an operating record at Boundary Dam that began in 2014.

Cansolv serves power, oil and gas, hydrogen, cement and lime, and chemical facilities. Teams should verify that the gas stream falls within the reported CO₂ concentration range of 3.5% to 27% and check how much heat the site can provide for solvent regeneration.

4. Entropy Modular CCS with Entropy23

CategoryPoint source
CountryCanada
ReadinessTRL 9
Score59.5/100
CaptureAbove 90% design capture
Energy667 kWh/tCO₂
CostAbout US$37/tCO₂ (C$50/tCO₂), levelized company figure

Entropy's modular post-combustion system uses the Entropy23 amine solvent to separate CO₂ from exhaust. It recovers heat from the host plant to reduce the energy needed for regeneration. Operators can add units in phases to existing gas plants, engines, and turbines.

On July 30, 2026, Glacier Phase 2 was commissioned in Alberta. The 15 MW gas-fired cogeneration unit has a CO₂ capture capacity of 160,000 t/yr and compresses the captured gas for saline storage. A third-party lifecycle assessment reported emissions of 84 kg CO₂ per MWh of electricity.

The system fits small and midsize emitters considering a phased retrofit. Teams should check whether their gas contains 1% to 15% CO₂ and verify how much heat they can recover during normal operation.

5. Cool Planet Technologies PolyActive membranes

CategoryPoint source
CountryUK
ReadinessTRL 7
Score59.3/100
Capture95% recovery for the third-generation module
EnergyEnergy not stated
CostCost not stated

PolyActive polymer membranes allow CO₂ to pass through faster than nitrogen. Cool Planet Technologies developed the membranes with Helmholtz-Zentrum Hereon and uses prefabricated modules to add capacity. The separation step requires neither steam nor chemical scrubbing.

On August 21, 2026, Cool Planet and Holcim commissioned the Höver demonstration plant in Germany, with capacity of up to 10,000 t/yr. The demonstration is a step toward capturing about 90% of the site's emissions. In December 2025, UK tests verified 95% recovery for a third-generation module rated at up to 37,000 t/yr.

The system is an option for cement and lime or power facilities with flue gas above 10% CO₂. Before a pilot, teams should check membrane recovery on their own flue gas and estimate how many modules they would need at plant scale.

6. Avnos Hybrid Direct Air Capture

CategoryCarbon removal
CountryUS
ReadinessTRL 7
Score62.0/100
CaptureCapture rate not applicable (direct air capture)
EnergyAbout 1,500 kWh/tCO₂ of electricity
CostBelow $250/tCO₂ by 2030 (company target)

A moisture-swing sorbent draws CO₂ and water from ambient air. The system uses the collected water to regenerate the sorbent, requires no external heat, and produces water as an output.

On August 27, 2026, Project Brighton began operating in Bridgewater, New Jersey, with funding from the US Office of Naval Research. At 450 t/yr, it was the largest hybrid direct air capture plant at start-up. Avnos launched a production line for factory-built modules in September 2026 and is targeting early 2027 for the 3,000 t/yr Project Cedar.

The system fits carbon removal teams assessing sites where electricity supply and water recovery matter. Ahead of a pilot, teams should verify power demand and water output under local air conditions.

7. Ucaneo electrochemical direct air capture

CategoryCarbon removal
CountryGermany
ReadinessTRL 6
Score59.7/100
CaptureCapture rate not applicable (direct air capture)
EnergyEnergy not stated
CostBelow $110/tCO₂ at commercial scale (company target)

Ucaneo's process takes inspiration from gas exchange in the lungs. Catalysts help CO₂ dissolve in an electrolyte as bicarbonate. An electrochemical step then releases CO₂ at room temperature, producing a stream above 99.9% purity.

On July 2, 2026, Ucaneo inaugurated its 150 t/yr plant in Berlin-Marzahn, Germany's largest direct air capture facility at the time. Ucaneo also partnered with Siemens in 2026 to commercialize the system and plans a plant with ten times the capacity.

The process fits teams assessing electricity-only carbon removal or comparing options for a high-purity CO₂ stream. Teams should request measured electricity consumption per metric ton and verify product purity at the intended throughput before committing to a pilot.

8. Airhive fluidized-bed direct air capture

CategoryCarbon removal
CountryUK
ReadinessTRL 8
Score58.6/100
CaptureCapture rate not applicable (direct air capture)
EnergyAbout 1,000 kWh/tCO₂
CostBelow $500/tCO₂ net after ramp-up (company estimate)

Airhive suspends fine mineral particles in a fluidized bed, where they react with CO₂ from air within seconds. A calciner heats the loaded sorbent to release CO₂. The system recovers heat internally and returns the particles to the reactor.

Between June and September 2026, Airhive advanced UnionDAC at Teesside with Mission Zero and Progressive Energy, acquired Carbyon, and secured a grant for a direct air capture and storage hub in South Australia. UnionDAC targets 20,000 t/yr by 2030. Airhive's 1,000 t/yr system at Deep Sky Alpha in Alberta started operating in November 2025.

The process fits carbon removal teams evaluating solid sorbents and able to supply heat for regeneration. Before a pilot, teams should verify calciner energy demand and how much heat the system can recover at the proposed throughput.

9. MCi Carbon mineral carbonation

CategoryCapture-to-mineral
CountryAustralia
ReadinessTRL 7
Score59.9/100
CaptureCapture rate not stated
EnergyEnergy not stated
CostCost not stated

MCi Carbon reacts CO₂ or flue gas with materials such as steel slag, mine tailings, or waste rock at low temperature and pressure. The reaction permanently binds CO₂ in carbonates and also produces silica. These outputs can serve cement, construction, and other manufacturing markets.

On June 19, 2026, the 2,500 t/yr Myrtle carbon refinery officially opened at Orica's Kooragang Island site near Newcastle, using CO₂ from Orica's ammonia plant. In July 2026, MCi Carbon partnered with Hatch and began designing its first commercial plants. These include an Austrian project for RHI Magnesita targeting 50,000 t/yr by 2030.

The process fits industrial sites with a CO₂ source and access to suitable mineral feedstocks. The first pilot checks are how local feedstocks react and whether the resulting carbonates and silica meet buyers' specifications.

10. Seabound onboard carbon capture

CategoryOnboard
CountryUK
ReadinessTRL 7
Score45.3/100
CaptureUp to 95% capture from treated exhaust (company figure)
EnergyEnergy not stated
CostCost not stated

Seabound fits containerized units to a ship's exhaust so CO₂ reacts with calcium hydroxide pellets. The reaction produces limestone pebbles that the ship stores onboard for unloading and reuse in port. The units also remove most of the sulfur from the exhaust they treat.

In February 2026, Seabound completed its first full-scale commercial units in Doncaster for the UBC Cork cement carrier, with installation still to follow. The European Space Agency awarded Seabound EUR 1.5 million in February 2026. Seabound appeared in our 2024 ranking, and a trial that year recorded 78% capture. Its move from pilot testing to commercial hardware met the milestone requirement for past picks to return in 2026.

The units fit shipping teams evaluating an exhaust retrofit and able to unload limestone on their routes. To prepare for a pilot, teams should check how much exhaust the units can treat, how much onboard storage they need, and whether the intended ports can handle unloading.

The comparison

How the ten technologies compare

The table compares all 10 technologies by capture method, target industries, technology readiness, and reported performance. It lists them in the ranked order with their scores out of 100, helping teams see which options fit their site and what to verify before a pilot.

# Supplier and technology Category Technology family TRL Capture rate Energy (kWh/tCO₂) Main industries Score
1 Air Liquide Cryocap Point source Cryogenic separation 9 90% to 95%, up to 98% for Cryocap Oxy and H₂ 336 (electricity) Cement and lime, hydrogen, iron and steel, chemicals, oil and gas 77.9
2 thyssenkrupp Polysius Pure Oxyfuel Point source Oxy-fuel combustion 7 Up to about 95%, including process CO₂ Not stated Cement and lime 65.2
3 Shell and Technip Energies Cansolv Point source Amine absorption 9 90%, with up to 99% claimed by the suppliers About 729 (heat) Power, oil and gas, hydrogen, cement and lime, chemicals 61.1
4 Entropy Modular CCS with Entropy23 Point source Modular amine absorption 9 Above 90% (design) 667 Power, oil and gas, iron and steel 59.5
5 Cool Planet Technologies PolyActive membranes Point source Polymer membrane separation 7 95% recovery for the third-generation module Not stated Cement and lime, power 59.3
6 Avnos Hybrid Direct Air Capture Carbon removal Moisture-swing sorbent 7 Not applicable About 1,500 (electricity) Direct air capture 62.0
7 Ucaneo electrochemical direct air capture Carbon removal Electrochemical separation 6 Not applicable Not stated Direct air capture 59.7
8 Airhive fluidized-bed direct air capture Carbon removal Fluidized-bed mineral sorbent 8 Not applicable About 1,000 Direct air capture 58.6
9 MCi Carbon mineral carbonation Capture-to-mineral Mineral carbonation 7 Not stated Not stated Iron and steel, cement and lime, chemicals, mining 59.9
10 Seabound onboard carbon capture Onboard Chemical looping (calcium-based) 7 Up to 95% of the CO₂ in treated exhaust, with 78% recorded in a 2024 trial Not stated Maritime transport 45.3

Capture rates and energy figures come from suppliers or our CCUS Database. Capture rate does not apply to direct air capture. Heat and electricity figures are not directly comparable, even when both are expressed in kWh per metric ton of CO₂.

Beyond the ranked

Technologies to examine beyond the top ten

Nine technologies from the 2026 shortlist warrant attention as their projects advance. A lower score or the rule for returning picks kept them outside the top ten. The developments below give teams specific projects and operating results to track.

Point source

Mitsubishi Heavy Industries Advanced KM CDR (KS-21)

The Padeswood cement CCS project moved into execution after a final investment decision in September 2025. The project is designed to capture 800,000 t/yr, and the technology appeared in our 2024 ranking.

Point source

SLB Capturi Advanced Carbon Capture

Uniper named SLB Capturi its preferred licensor for Connah's Quay in July 2026. The technology appeared in our 2025 ranking.

Point source

Capsol Technologies CapsolEoP and CapsolGT

Construction is underway at Stockholm Exergi's bioenergy CCS project, which has a planned capture capacity of 800,000 t/yr. Holcim invested in Capsol, which appeared in our 2024 ranking.

Point source

Carbon Clean CycloneCC

Carbon Clean commissioned a CycloneCC pilot in Navi Mumbai. It is also the capture supplier for the front-end engineering design phase of Uniper's NorthStarH2 project.

Point source

Mantel molten borate capture

Wood is handling front-end engineering design for Mantel's first commercial unit in Western Canada. Mantel also raised $18 million.

Point source

K2-CO₂ hot potassium carbonate

Cardinal Glass ordered long-lead equipment for its Winlock project. The order represents a first for the capture technology in float glass production.

Carbon removal

Captura direct ocean capture

Equinor validated Captura's direct ocean capture pilot. Captura is set to supply CO₂ to a plant in France designed to produce 75,000 t of eSAF per year.

Capture-to-mineral

Carbfix capture and mineralization

The Silverstone project completed its first full year of operation. During that period, it captured 99.6% of the CO₂ and 100% of the hydrogen sulfide.

Onboard

Carbon Ridge centrifugal onboard capture

DNV validated results from a five-month tanker pilot. CO₂ capture peaked above 98% during the trial.

The economics

What drives the cost of carbon capture?

The cost of carbon capture depends on the gas stream, the energy needed to separate and compress CO₂, and the costs included in the estimate. Project economics also depend on policy support and whether the technology has operated at the proposed scale. The factors below help teams compare cost figures before using them in a project budget.

Energy for separation and compression

Separating CO₂ from a dilute gas stream requires energy, and compressing the captured gas adds to that demand. A coal plant without heat integration could lose up to 30% of its electrical efficiency after adding capture, according to a December 2015 analysis. Fans, compressors, and pumps draw power and further reduce net output.

Our report lists about 729 kWh/tCO₂ of heat for Cansolv and 336 kWh/tCO₂ of electricity for Cryocap. The two reported direct air capture figures range from about 1,000 kWh/tCO₂ for Airhive to about 1,500 kWh/tCO₂ for Avnos. Teams should price heat and electricity separately and check whether the figures include compression.

CO₂ concentration at the source

The CO₂ concentration in ambient air is about one three-hundredth of that in smokestack exhaust. A direct air capture system must therefore process much more gas to recover the same amount of CO₂, adding to energy demand and cost.

Our report lists Avnos's target of below $250/tCO₂ by 2030 and Ucaneo's target of below $110/tCO₂ at commercial scale. Airhive estimates a net cost below $500/tCO₂ after ramp-up. Teams should check the scale and operating assumptions behind each supplier figure.

Reported costs versus supplier targets

The 2026 report gives a range of $58 to $110/tCO₂ for Cansolv at Boundary Dam. Air Liquide reports about $40/tCO₂ for Cryocap, and Entropy estimates a levelized cost of about US$37/tCO₂.

A February 2021 analysis estimated capture costs at about US$15 to US$25 per metric ton of CO₂ for pure or concentrated streams, such as those from ethanol production and natural gas processing. The same commentary put costs at US$40 to US$120 per metric ton for dilute streams from cement plants and power generation and identified direct air capture as the most expensive route. Teams should distinguish operating costs from supplier targets, check how each estimate was calculated, and confirm whether it covers compression and storage.

Policy support and project attrition

Almost all operating CCS projects had received government financial support as of 2020. Capital grants were the main form of support, with operating subsidies playing a smaller role. Subsidies, carbon prices, and emissions limits are among the conditions that can make CCS competitive.

By 2020, just under half of the projects announced from 2010 onward had dropped out of the CCS pipeline. Operating projects were concentrated in applications with lower capture costs, including natural gas processing, fertilizer production, and ethanol production. The 2026 ranking requires a verified milestone so teams can see how far each project has progressed.

The site check

How to match a capture technology to a site

A capture system has to fit the site's gas stream, available utilities, and existing equipment. Teams also need a destination for the captured CO₂ and evidence that supports the proposed scale. The checks below help narrow the list and define what a first pilot should test.

Start with CO₂ concentration and gas composition

Our report lists Cryocap for gas above 15% CO₂ on a dry basis and PolyActive membranes for gas above 10% CO₂. Cansolv's reported range is 3.5% to 27%, and Entropy's is 1% to 15%. Direct air capture works on ambient air, which contains about 0.04% CO₂.

A 2024 peer-reviewed study linked impurities in captured CO₂ streams to corrosion and chemical reactions during transport and injection. Teams should run pilots on actual flue gas to determine what treatment the captured stream needs before transport.

Check which utilities the site can supply

Cansolv uses heat to regenerate its solvent. Entropy recovers heat from the host plant to reduce the energy needed for regeneration. Teams evaluating either system should check how much heat the site can supply during normal operation.

Cryocap, Ucaneo, and Avnos run on electricity for capture. Teams should check whether the site has enough electrical capacity for the proposed throughput and how the added load affects operating costs.

Decide how much plant change is acceptable

Amine, membrane, and cryogenic systems can treat gas downstream of the host process, making them candidates for end-of-pipe retrofits. Pure Oxyfuel changes combustion inside the cement kiln and requires a supply of pure oxygen.

Entropy and Cool Planet Technologies use modules that operators can add in phases. Teams should identify the equipment changes and capacity needed for the first installation, then determine what they could add after reviewing operating results.

Confirm the CO₂ has somewhere to go

For geological storage, teams should confirm access to a storage site and a way to transport the CO₂. Pipelines are the usual transport option, and ships also move captured CO₂.

For MCi Carbon's mineral carbonation process, teams should check whether the carbonates and silica meet buyer specifications. Shipping teams evaluating Seabound should verify that the vessel can store the limestone produced and that ports on its route can unload it.

Size the first step to the evidence

The 2026 ranking gives plant start-up the most weight, followed by a final investment decision or construction. Contracts and selections carry less weight, followed by pilots and verified results. Teams can use these stages to judge how much operating evidence exists before budgeting for a pilot.

In 2026, the Höver demonstration was commissioned with capacity of up to 10,000 t/yr, and Glacier Phase 2 was commissioned with capacity of 160,000 t/yr. Project Brighton began operating in 2026 with a capacity of 450 t/yr. Teams should compare the proposed pilot with a reference plant that treats a similar CO₂ source and check what the trial can establish at that scale.

Our CCUS Database

Explore 1,600+ more carbon capture projects.

Every project, technology and storage permit behind this report, updated monthly, with a business case calculator for any site.

1,600+
projects
455
capture technologies
~280
storage permits
About Prescouter

How can Prescouter help?

Our scientists work as an extension of your team, from screening capture technologies to planning a pilot. The principles below explain how we work and what your team can expect.

01

Scientists

In-house scientists and engineers, backed by a global network of 10,000+ vetted industry experts. We speak chemistry, process engineering, and life cycle assessment (LCA), so there is no ramp-up on your side.

02

Data-driven

Every conclusion traces back to evidence, including project data, deal prices, patents, and expert interviews. Several data points stand behind each answer, never one person's opinion.

03

Anonymous

We contact vendors, suppliers, and experts without naming your company. Your team gets candid answers and your strategy stays private, down to sourcing samples on your behalf.

500+Clients worldwide
5,000+Research reports created
150,000+Hours of research completed for clients

An independent, outside view. Technical and commercial questions in one engagement, and far more cost-efficient than traditional consulting.

Common questions

FAQs

Which carbon capture technology led the 2026 ranking?

Air Liquide's Cryocap led our 2026 ranking with a score of 77.9 out of 100. Cryocap is designed for gas streams above 15% CO₂ on a dry basis, so teams should check inlet concentration and electricity supply before shortlisting it.

What evidence shows that carbon capture works in practice?

Cansolv has operated at the Boundary Dam power plant since 2014. Based on a 2024 estimate, CCS stores more than 50 million metric tons of CO₂ a year.

What concerns do critics raise about carbon capture?

Critics cite capture costs, energy demand, and the use of captured CO₂ for enhanced oil recovery. As of 2020, almost all operating CCS projects had received government financial support, mainly through capital grants. By the same year, slightly fewer than half of the projects announced from 2010 onward had dropped out of the CCS pipeline.

How does capturing CO₂ at a plant differ from capturing it from air?

Point-source systems separate CO₂ from industrial gas streams, such as power plant or kiln exhaust. Direct air capture extracts CO₂ from ambient air, which has about one three-hundredth the CO₂ concentration of smokestack exhaust. That lower concentration raises the energy needed for separation.

How much energy does it take to capture a metric ton of CO₂?

Our report lists Cryocap at 336 kWh/tCO₂ of electricity, Entropy at 667 kWh/tCO₂, and Cansolv at about 729 kWh/tCO₂ of heat. For direct air capture, it lists about 1,000 kWh/tCO₂ for Airhive and about 1,500 kWh/tCO₂ of electricity for Avnos. Teams should account for heat and electricity separately when estimating utility costs.

Where does CO₂ go after capture?

Operators typically compress CO₂ and move it by pipeline, although trucks, trains, and ships are also used. For geological storage, operators inject it into saline formations or depleted oil and gas reservoirs. Captured CO₂ can also be used for enhanced oil recovery or incorporated into building materials.

Author
Christian Salles

Christian Salles

Technical Director

Christian Salles is Technical Director for Prescouter’s Natural Resources vertical, where he specializes in materials, manufacturing, and testing. He has more than 15 years of energy industry experience, including over a decade in oil and gas and nuclear power. His expertise includes aging management, failure analysis, and specialty alloy consulting. He draws on that background to advance carbon capture initiatives and support clients’ innovation and sustainability projects.

Never miss an insight

Get insights delivered right to your inbox

Download Full Strategic Report

Enter your details to receive the technical deep-dive.

By clicking download, you give consent to PreScouter to use the information you have provided to contact you about relevant content, products, and services.

Access the Interactive Dashboard

Enter your details to explore the interactive dashboard.

By clicking Access Dashboard, you give consent to Prescouter to use the information you have provided to contact you about relevant content, products, and services.

Book a Session

Want to skip the email back-and-forth?

Pick a time on our calendar right now.

If you’d like to know the outcome of your submission, please leave your email address